How to Fix Power Windows

In this modern age, mostly cars do not have windows that may be manually rolled up, as alternative cars have power window that can be controlled with a press on a button. Sometimes, due to some problems a power window of your car may not work properly. The reasons behind these problems may take in a faulty fuse, wire, motor or else switch.

You may take your car to an automobile shop for repair but it will be better if you use to tackle this problem on your own. For this reason, you must first know how to fix a power window. The following steps guide you in this regard.

What you will need:

• Power windows
• Screwdriver
• Jumper wires
• Test light

Procedure:

• To begin, you have to come across a secure place to park your car at the same time as you do the maintenance. There are power windows that can merely work if their ignition switch is on, so confirm you set it to that. In case if the window panel of the driver’s side has a lock control switch, put it in the on position, so the switches of every window may be controlled.

• Locate the core breaker otherwise power window fuse. Nearly all car models have their fuses created beneath the driver’s side’s dashboard. If it’s blown, you must change it. After that, make out if the windows work.

• By means of a test light, look at the wires linking the fuse box and the main control switch. In numerous car models, the switch may be pulled off the panel using a screwdriver. Put together the test light wire’s end to a good ground, and at that moment turn on the ignition.

• With the test light’s tip, lay a hand on the wire attached to the switch. Notice if it fails to switch on, next the voltage does not get to the control switch. The trouble then comes from the wire that comes from the fuse box. This is the wire that gives power to the window switch or else the wire connections.

• If only one window is not working, come across the switch for it. Nearly all models permit you to tug on the switch with a screwdriver. Affix the test light to a ground, and after that touch the both ends of the switch’s electrical connectors as you switch it.

• If the light is not coming on, observe if there is an opening at the wire that is attached to the main control switch. If the light only appears at one of the switch’ sides, then the switch is the one that is out of order and is required to be replaced.

• Carry off the door panel, to get to the window motor. As soon as you discover the motor electrical connector, bring into play the test light to touch the wire that comes from the switch, as you manage it. If the light is not coming on, there is a short at the wire. If it goes on, the wire connection is fair enough, and there is no mechanical impediment stopping the window from functioning.

• Acquire the electrical connector from the motor of the power window. Put a car battery next to the window, and connect a couple of jumper wires among the connector and battery. If the motor does not work, put back it. If it does work, afterward the failed connection is at the electrical connector is switch side.

Power windows may possibly be flat, although like any other machine; they can stop working at times. With the described tips, you can resolve this dilemma exclusive of discussing with an expert.