How to Polish Wheels – Wheel Polish Tips

A car owner should pay extra attention to the cleanliness of its vehicle as it is somewhat related to its better performance as well. Whenever you use to polish your car, do not overlook to polish the car’s wheels. Now, see how you can polish your car wheels.

Things you’ll need:

You will need the following to polish your car wheels.

• Water
• Car soap
• Degreaser
• 400 grit sandpaper
• Car polish
• Rags
• Coat sealant
• Buffer
• Drill

Steps:

You have to follow some steps that guide you about how to polish wheels. Remember that polishing your wheels is a second part method.

• Take the wheels off to ensure you do not run off some parts dirty or unclean
• Wash the wheels methodically through water and car soap to take away dusts and come off stubborn dirt that has composed on the wheels.
• Do away with the remaining grime with a soft cloth or rag. You are supposed to be watchful when doing this to stay away from fortuitously scratching the wheel.
• Wipe up the wheels dry with a soft cloth.
• Take out grease by using wax or else degreaser.  Put some wax on a cloth and wipe the complete surface and elements of the wheels with it. Make certain that you don’t have excluded any area.
• Wash down your wheels another time to get rid of any dirt or grim that might have been mixed with the wax or degreaser.
• Wipe your wheels dry or waterless.

Polishing Your Wheels:

Now, it is the time to polish your wheels.

• Sand your wheels by means of sandpaper. Ensure to select the appropriate grit for your wheels. You might harm your wheels if you prefer grit that you are not advised to make use of.  This step is necessary, particularly when there are pits on your wheels.

• Make use of a drill with a sanding head when you have to sand big areas or else when the pitting cannot be remedied by manual sanding.

• Clean your wheel to take out dusts and wipe it waterless.

• At this moment, apply an aluminum polish on the wheels and spread it by means of a soft cloth.

• You possibly will also use a drill with polisher to get things done fast.

• Look over your wheels and throw away surplus polish. For areas tough to get to like around the caps, nut holes and valve stem, bring into play a screw driver and for this use the tip wrapped with a soft or spongy cloth. Be cautious when you do this, to keep away from getting scratches on your wheels.

• Polish your wheels and use a coat sealant for an additional finished look.

Tips:

• Wheels made of magnesium alloy usually do not require polishing. You can keep your wheels appealing by just simply washing off the grime or dust.

• Ahead of buying a polish, make certain that it does not hold ammonia or any anhydrous substances.

These chemicals retort with the metals of your wheels and would cause harm after some time.

It does not take too much time to polish your car wheels and not a complex or complicated procedure as well. Although, it saves a lot of money by carrying out this task on your own, you just have to follow some ways to do it. And then you will find your car with a shiny and gleaming look.